n single blow fuse for overcurrent protection n 1608 (eia 0603) miniature footprint n fast-acting precision fuse n ul 248-14 listed n rohs compliant* and halogen free** n thin flm chip design n surface mount packaging for automated assembly electrical characteristics sf-0603fpxxxf series - fast acting precision surface mount fuses model rated current (amps) fusing time resistance () typ.*** rated voltage interrupting rating typical i 2 t (a 2 s) **** sf-0603fp015f-2 0.15 open within 5 sec. at 200 % rated current 2.20 dc 65 v dc 35 v 50 a ac 65 v 13 a 0.0006 sf-0603fp020f-2 0.20 1.30 0.0014 sf-0603fp025f-2 0.25 1.10 0.0016 sf-0603fp0375f-2 0.375 0.48 0.0040 SF-0603FP050F-2 0.50 0.185 0.0120 sf-0603fp075f-2 0.75 0.112 0.0210 sf-0603fp100f-2 1.00 0.069 0.0420 sf-0603fp125f-2 1.25 0.048 dc 35 v 35 a ac 65 v 13 a 0.0520 sf-0603fp150f-2 1.50 0.037 0.0710 sf-0603fp175f-2 1.75 0.031 dc 35 v dc 35 v 35 a ac 24 v 50 a 0.10 sf-0603fp200f-2 2.00 0.026 0.14 sf-0603fp250f-2 2.50 0.021 0.24 sf-0603fp300f-2 3.00 0.0176 0.33 sf-0603fp350f-2 3.50 0.0148 0.49 sf-0603fp400f-2 4.00 0.0125 0.63 sf-0603fp500f-2 5.00 0.0095 1.10 reliability testing singlfuse ? sf-0603fpxxxf series features *** resistance value measured with 10 % rated current at 25 c ambient. **** melting i 2 t calculated at 0.001 second pre-arcing time. no. test requirement test condition test reference 1 bending 1 a: dcr change 10 % >1 a: dcr change 20 % 2 mm refer to stp document 2 solderability minimum 95 % coverage one dip at 255 c for 5 seconds mil-std-202 method 208 3 thermal shock dcr change 10 % no mechanical damage 100 cycles between -55 c and +125 c mil-std-202 method 107 4 moisture resistance dcr change 10 % no excessive corrosion 10 cycles mil-std-202 method 106 5 salt spray dcr change 10 % no excessive corrosion 48 hour exposure, 5 % salt solution mil-std-202 method 101 6 mechanical vibration dcr change 10 % no mechanical damage 0.4 inch d.a. or 30 g between 5-3000 hz mil-std-202 method 204 7 mechanical shock dcr change 10 % no mechanical damage 1500 g, 0.5 ms, half-sine shocks mil-std-202 method 213 8 life no electrical opens during testing voltage drop change shall be less than 10 % of initial value 75 % rated current for 2000 hours at ambient temperature between +20 c and +30 c refer to stp document *rohs compliant lead free *rohs compliant & **halogen free lead free versions are rohs compliant* h * rohs directive 2002/95/ec jan. 27, 2003 including annex and rohs recast 2011/65/eu june 8, 2011. ** bourns considers a product to be halogen free if (a) the bromine (br) content is 900 ppm or less; (b) the chlorine (cl) content is 900 ppm or less; and (c) the total bromine (br) and chlorine (cl) content is 1500 ppm or less. singlfuse is a trademark of bourns, inc. specifcations are subject to change without notice. the device characteristics and parameters in this data sheet can and do vary in different applica - tions and actual device performance may vary over time. users should verify actual device performance in their specifc applications. ul file number .................................................... e198545 http://www.ul.com/ follow link to online certifcates directory, then enter ul file no. e198545, or click here agency recognition
sf-0603fpxxxf series - fast acting precision surface mount fuses singlfuse ? sf-0603fpxxxf series applications specifcations are subject to change without notice. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. users should verify actual device performance in their specifc applications. how to order sf - 0603 fp 015 f - 2 singlfuse? product designator smd footprint 1608 = (eia 0603) size fuse blow type fp = fast acting precision rated current 015 ~ 500 (150 ma ~ 5.0 a) structure type f = thin flm packaging type - 2 = tape & reel typical part marking represents total content. layout may vary. rated current (a) = 0.150 = 0.200 = 0.250 = 0.375 = 0.500 = 0.750 = 1.000 = 1.250 = 1.500 = 1.750 = 2.000 = 2.500 = 3.000 = 3.500 = 4.000 = 5.000 packaging quantity 8,000 pieces per 7-inch reel construction operating temperature .................................................................................................................................................................. -55 c to +90 c storage conditions temperature .............................................................................................................................................................................. +5 c to +35 c humidity ......................................................................................................................................................................................... 40 % to 75 % shelf life .......................................................................................................................................................... 2 years from manufacturing date moisture sensitivity level ...................................................................................................................................................................................... 1 esd classifcation (hbm) ............................................................................................................................................................................ class 6 environmental characteristics product dimensions recommended pad layout 1.6 0.10 (.063 .004) 0.36 0.10 (.014 .004) 1.00 (.039) 0.36 0.10 (.014 .004) 0.36 0.10 (.014 .004) 0.36 0.10 (.014 .004) 0.30 0.10 (.012 .004) 0.81 0.10 (.032 .004) 2.20 (.087) 0.80 (.031) 1.6 0.10 (.063 .004) 0.36 0.10 (.014 .004) 1.00 (.039) 0.36 0.10 (.014 .004) 0.36 0.10 (.014 .004) 0.36 0.10 (.014 .004) 0.30 0.10 (.012 .004) 0.81 0.10 (.032 .004) 2.20 (.087) 0.80 (.031) 1.6 0.10 (.063 .004) 0.36 0.10 (.014 .004) 1.00 (.039) 0.36 0.10 (.014 .004) 0.36 0.10 (.014 .004) 0.36 0.10 (.014 .004) 0.30 0.10 (.012 .004) 0.81 0.10 (.032 .004) 2.20 (.087) 0.80 (.031) current rating thermal derating curve 140 120 100 80 60 40 20 0 derating (%) -60 -40 -20 02 04 06 08 0 100 maximum operating temperature (c) pcb cuni/sn epoxy cu/sn n portable memory n lcd monitors n disk drives n pdas n digital cameras n mp3 players n cell phones n rechargeable battery packs n battery chargers n set-top boxes n industrial controllers n battery management systems (bms) n led lighting n power tools dimensions: mm (inches)
sf-0603fpxxxf series - fast acting precision surface mount fuses specifcations are subject to change without notice. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. users should verify actual device performance in their specifc applications. solder refow recommendations time temperature (c) t l time 25 c to peak t p t s t smax t smin t p 260 150 10 sec. max. preheating t l 25 t c -5 c preheat area max. ramp up rate = 3 c/s max. ramp down rate = 6 c/s temperature (c) 120 seconds time recommended temperature profle for wave soldering wave soldering is suitable for 0603 size models. profle feature pb-free assembly preheat / soak: temperature min. (t smin ) temperature max. (t smax ) time (t s ) from (t smin to t smax ) 150 c 200 c 60~120 seconds ramp up rate (t l to t p ) 3 c / second max. liquidous temperature (t l ) time (t l ) maintained above t l 217 c 60~150 seconds peak package body temperature (t p ) 260 c time (t p )* within 5 c of the specifed classifcation temperature (t c ) 30 seconds* ramp down rate (t p to t l ) 6 c / second max. time 25 c to peak temperature 8 minutes max. time temperature (c) t l time 25 c to peak t p t s t smax t smin t p 260 150 10 sec. max. preheating t l 25 t c -5 c preheat area max. ramp up rate = 3 c/s max. ramp down rate = 6 c/s temperature (c) 120 seconds time * tolerance for peak profle temperature (tp ) is defned as a supplier minimum and a user maximum.
3312 - 2 mm smd trimming potentiometer sf-0603fpxxxf series - fast acting precision surface mount fuses rev. a 03/18 specifcations are subject to change without notice. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. users should verify actual device performance in their specifc applications. average pre-arcing time vs. current curves average i 2 t vs. t curves 1 0.1 0.01 0.001 0.0001 pre-arcing time (seconds) 0.1 11 01 00 current (a) 10 0 10 1 0. 1 0.01 0. 00 1 0. 000 1 i 2 t (a 2 s) 0.0001 0.001 0.01 0.1 10 1 time (seconds) 0.15 a 0.20 a 0.25 a 0.375 a 0.50 a 0.75 a 1.00 a 1.25 a 1.50 a 1.75 a 2.00 a 2.50 a 3.00 a 3.50 a 4.00 a 5.00 a 0.15 a 0.20 a 0.25 a 0.375 a 0.50 a 0.75 a 1.00 a 1.25 a 5.00 a 4.00 a 3.50 a 3.00 a 2.50 a 2.00 a 1.75 a 1.50 a 1 0.1 0.01 0.001 0.0001 pre-arcing time (seconds) 0.1 11 01 00 current (a) 10 0 10 1 0. 1 0.01 0. 00 1 0. 000 1 i 2 t (a 2 s) 0.0001 0.001 0.01 0.1 10 1 time (seconds) 0.15 a 0.20 a 0.25 a 0.375 a 0.50 a 0.75 a 1.00 a 1.25 a 1.50 a 1.75 a 2.00 a 2.50 a 3.00 a 3.50 a 4.00 a 5.00 a 0.15 a 0.20 a 0.25 a 0.375 a 0.50 a 0.75 a 1.00 a 1.25 a 5.00 a 4.00 a 3.50 a 3.00 a 2.50 a 2.00 a 1.75 a 1.50 a asia-pacifc: tel: +886-2 2562-4117 ? email: asiacus@bourns.com emea: tel: +36 88 520 390 ? email: eurocus@bourns.com the americas: tel: +1-951 781-5500 ? email: americus@bourns.com www.bourns.com
sf-0603fpxxxf series tape and reel packaging specifcations sf-0603fpxxxf series tape dimensions per eia 481-2 w 8.10 0.20 (.319 .008) p 0 4.0 0.10 (.157 .004) p 1 2.0 0.05 (.079 .002) p 2 2.0 0.05 (.079 .002) a 0 1.00 0.10 (.039 .004) b 0 1.80 0.10 (.071 .004) f 3.50 0.05 (.138 .002) e 1 1.75 0.10 (.069 .004) d 0 1.55 + 0.05 (.061 + .002) t 0.60 0.08 (.024 .003) packaging: paper tape, 8,000 pcs. per reel direction of unreeling d o a o t cover tape p o 10 p o p 2 p 1 e 1 b 0 w f 60.20 0.50 (2.370 .020) dia. 13.20 +0.3/-0.2 (.520 +.012/-.008) dia. 178.00 1.00 (7.008 .039) dia. 0.2 0.4 0.6 0.8 0.2 0.4 0.6 0.8 13.40 0.50 (.539 .020) 1.40 0.20 (.055 .008) 1.20 0.20 (.047 .008) 2.20 0.30 (.087 .012) dimensions: mm (inches) specifcations are subject to change without notice. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. users should verify actual device performance in their specifc applications.
|
